manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

Instrumentation and Controls

. . . 154

Midgate Drain Grate

The midgate drain grate, located 
near the base of the midgate in the 
cargo area, can be removed for 
cleaning.

To clean the drain, first remove 
any debris lying on top of the 
midgate drain grate. Then lower 
the midgate. See "Midgate" earlier 
in this section. Pull up on the rear 
side of the drain grate and tilt it 
away from you as you pull it 
straight out. Flush the drain with 
water.

Reverse the procedure to reinstall 
the grate.

Cargo Floor Drains

The four drain areas in the cargo 
bed should be cleaned periodically 
to ensure proper water drainage. 
The cargo mat, if equipped, may 
be lifted or removed to properly 
flush and clean the drains.

$10araEscaladeEXT  Page 154  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

Camcar 2155 Fitting Instructions preview
2155
Brand: Camcar Pages: 2
B-Speech B-Speech Prim Manual preview
B-Speech Prim
Brand: B-Speech Pages: 18
Cadillac SRX 2012 Instructions preview
SRX 2012
Brand: Cadillac Pages: 3
Cadillac Escalade 2021 Features Manual preview
Escalade 2021
Brand: Cadillac Pages: 12
Cadillac CTS 2008 Navigation System Owner'S Manual preview
CTS 2008
Brand: Cadillac Pages: 106
Cadillac CTS 2008 Customer Convenience/Personalization Manual preview
CTS 2008
Brand: Cadillac Pages: 20
Cadillac ATS 2014 Convenience/Personalization Manual preview
ATS 2014
Brand: Cadillac Pages: 20
Cadillac ATS 2013 Owner'S Manual preview
ATS 2013
Brand: Cadillac Pages: 326
Cadillac CTS 2012 Quick Manual preview
CTS 2012
Brand: Cadillac Pages: 28
Cadillac ESCALADE - BROCHURE 2009 Owner'S Manual preview
ESCALADE - BROCHURE 2009
Brand: Cadillac Pages: 602
Cadillac ESCALADE ESV 2004 Owner'S Manual preview
ESCALADE ESV 2004
Brand: Cadillac Pages: 20
Cadillac ESCALADE EXT 2005 Owner'S Manual preview
ESCALADE EXT 2005
Brand: Cadillac Pages: 460
Cadillac CT6 SUPER CRUISE 2018 Convenience/Personalization Manual preview
CT6 SUPER CRUISE 2018
Brand: Cadillac Pages: 8
Cadillac XT6 2023 Manual preview
XT6 2023
Brand: Cadillac Pages: 20
Cadillac LYRIQ 2023 Owner'S Manual preview
LYRIQ 2023
Brand: Cadillac Pages: 337
Toyota 2012 Rav4 Owner'S Manual preview
2012 Rav4
Brand: Toyota Pages: 529
TATA Motors Safari Owner'S Manual & Service Book preview
Safari
Brand: TATA Motors Pages: 161
TAUBENREUTHER 16 - 590 Fitting Instructions Manual preview
16 - 590
Brand: TAUBENREUTHER Pages: 11

Brands by name

Popular brands

Load more brands