manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

Seats and Restraints

. . . 212

When the vehicle is started with a 
child restraint installed in the front 
passenger seat, the "off" indicator 
should appear in the passenger 
sensing system status bar after 
the system has completed its 
self-check.

If a child restraint has been 
installed and the Passenger 
Sensing System has not 
deactivated the air bag, turn the 
vehicle off. Remove and then 
reinstall the child restraint.

Follow the manufacturer's 
instructions.

A thick layer of material (such 
as a blanket) or aftermarket equip-
ment (such as seat covers, heaters 
or massagers) located between the 
seat cushion and the child restraint 
or small occupant can affect how 
the passenger sensing system 
operates. Remove any additional 
material from the seat cushion 
before reinstalling or securing the 
child restraint or small occupant.

If, after you restart the vehicle, the 
"on" indicator still appears, turn 
the engine off again.

Check that the vehicle’s seatback is 
not pressing the child restraint into 
the seat cushion. If it is, slightly 
recline the vehicle’s seatback and 
adjust the seat cushion if possible.

Also make sure that the child 
restraint is not trapped under the 
vehicle's head restraint. If this 
happens, adjust the head restraint.

Restart the engine.

CAUTION

If the "on" indicator still 
appears, secure the restraint in 
a rear seat position and have 
your vehicle serviced as soon as 
possible.

See "Child Restraints" later in this 
section.

$10araEscaladeEXT  Page 212  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

JAC S5 Workshop Manual preview
S5
Brand: JAC Pages: 70
J-Top COMPACT Instructions preview
COMPACT
Brand: J-Top Pages: 2
Genesis Multiple G9F18 AU000 Quick Start Manual preview
Multiple G9F18 AU000
Brand: Genesis Pages: 3
Kolpin 25-9250 Owner'S And Operator'S Manual preview
25-9250
Brand: Kolpin Pages: 25
Chevrolet Camaro 12000 1968 Series Factory Assembly Instruction Manual preview
Camaro 12000 1968 Series
Brand: Chevrolet Pages: 455
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Ford Windstar 2003 Quick Reference Manual preview
Windstar 2003
Brand: Ford Pages: 2
Fiat 500 L 2019 User Manual preview
500 L 2019
Brand: Fiat Pages: 172
Honda HondaLink Quick Start Manual preview
HondaLink
Brand: Honda Pages: 6
Whispbar K728W Fitting Instructions Manual preview
K728W
Brand: Whispbar Pages: 85
Enduro autoSteady AS101 User Manual preview
autoSteady AS101
Brand: Enduro Pages: 48
Dakota Digital MCL-7000 Series Quick Start Manual preview
MCL-7000 Series
Brand: Dakota Digital Pages: 2
Volvo 2010 C30 Owner'S Manual preview
2010 C30
Brand: Volvo Pages: 284
Cadillac 1997 Catera Owner Assistance Information preview
1997 Catera
Brand: Cadillac Pages: 34
AA Products RB0007 Instruction Manual preview
RB0007
Brand: AA Products Pages: 6
Easee Home Wallbox Installation Instructions Manual preview
Home Wallbox
Brand: Easee Pages: 12
PAC Stinger ELEV8 Install Manual preview
Stinger ELEV8
Brand: PAC Pages: 14
Kolpin 98310 Product Instructions preview
98310
Brand: Kolpin Pages: 3

Brands by name

Popular brands

Load more brands