manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

Service and Maintenance

. . . 362

NOTICE

When cleaning aluminum or 
chrome-plated wheels, do not 
use strong soaps, chemicals, 
abrasive polishes/cleaners/
brushes or cleaners that contain 
acid.

Do not use chrome polish on 
aluminum wheels.

The surface of the wheels could 
be damaged and the repairs 
would not be covered by your 
warranty.

To wash the wheels on your 
vehicle, use a clean, soft cloth 
dampened with water and a mild 
detergent. Rinse the wheels 
with clean water and dry them 
thoroughly.

Then, apply wax to the wheels, if 
desired.

NOTICE

Do not drive your vehicle 
through an automatic car wash 
that has silicone carbide tire 
cleaning brushes.

The wheels could be damaged 
and the repairs would not be 
covered by your warranty.

NOTICE

When using a petroleum-based 
tire dressing, always wipe of 
any overspray from the 
vehicle’s painted surfaces.

Otherwise, the vehicle’s paint 
finish and/or tires may be 
damaged.

$10araEscaladeEXT  Page 362  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

Calira 811 Manual preview
811
Brand: Calira Pages: 14
Daihatsu G200 Service Manual preview
G200
Brand: Daihatsu Pages: 485
DANA TM4 SUMO MD MV Installation Manual preview
TM4 SUMO MD MV
Brand: DANA Pages: 42
dallara F305 Manual preview
F305
Brand: dallara Pages: 37
Yakima BOA Installation Instructions Manual preview
BOA
Brand: Yakima Pages: 8
Metra Electronics 99-3103 Installation Instructions preview
99-3103
Brand: Metra Electronics Pages: 2
BGS technic 40108 Manual preview
40108
Brand: BGS technic Pages: 5
Oldsmobile 1999 88 Owner'S Manual preview
1999 88
Brand: Oldsmobile Pages: 344
ABL eMH3 Installation Manual preview
eMH3
Brand: ABL Pages: 66
Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
Saleen 10-8002-C11670C Manual preview
10-8002-C11670C
Brand: Saleen Pages: 17
Whispbar K678W Fitting Instructions Manual preview
K678W
Brand: Whispbar Pages: 14
Draw tite 24943 Installation Instructions preview
24943
Brand: Draw tite Pages: 4
Mercedes-Benz CLS 280 2008 Owner'S Manual preview
CLS 280 2008
Brand: Mercedes-Benz Pages: 329
Audiovox UniStreamONE Installation Manual preview
UniStreamONE
Brand: Audiovox Pages: 24
Mercedes-Benz GLE Coupe Brief Overview preview
GLE Coupe
Brand: Mercedes-Benz Pages: 2
Westin 25-0560 Instructions preview
25-0560
Brand: Westin Pages: 2
TATA Motors Sumo Victa EX Owner'S Manual & Service Book preview
Sumo Victa EX
Brand: TATA Motors Pages: 92

Brands by name

Popular brands

Load more brands