Cadillac Escalade EXT Owner'S Manual Download Page 67

Page: 67 / 402

67 . . .

–

Section

While in this submenu, press
the button repeatedly to
scroll through the following
options:

OFF

(off)

Select this option to disable
this feature.

(on)

Select this option to enable
this feature.

This is the default setting.

NO CHANGE

(no change)

Once the desired setting is
displayed, press the

button

to select it.

You may now either exit pro-
gramming mode or program
the next available feature.

To exit programming mode,
see "Exiting Programming
Mode" later in this section.

•

FACTORY SETTINGS

(factory

settings)

This feature allows you to reset
all of the system's programma-
ble features to their default
settings.

Press the

button to enter the

submenu.

While in this submenu, press
the button repeatedly to
scroll through the following
options:

RESTORE ALL

(restore all)

If you select this option, all of
the system’s programmable
features will be reset to their
default settings.

This is the default setting.

DO NOT RESTORE

(do not

restore)

If you select this option, the
current settings will not
change.

Once the desired setting is
displayed, press the

button

to select it.

You may now either exit pro-
gramming mode or program
the next available feature.

To exit programming mode,
see "Exiting Programming
Mode" later in this section.

$10araEscaladeEXT Page 67 Wednesday, October 14, 2009 9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Search results

Summary of Contents for Escalade EXT

Reviews:

Related manuals for Escalade EXT

Brands by name

Popular brands

Cadillac Escalade EXT, Owner'S Manual

Search results

Summary of Contents for Escalade EXT

Reviews:

Related manuals for Escalade EXT

Brands by name

Popular brands