manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

 

. . . 14

 

Important Safety Precautions

CAUTION 

(Continued)

 

Flowing or rushing water 
creates strong forces. If you try 
to drive through flowing water, 
as you might at a low water 
crossing, your vehicle can be 
carried away. As little as six 
inches of flowing water can 
carry away a smaller vehicle. If 
this happens, you and other 
vehicle occupants could drown. 
Don’t ignore police warning 
signs, and otherwise be very 
cautious about trying to drive 

 

through flowing water.

 

Driving on Hills

CAUTION

 

If you need to stop on a hill, do 
not hold the vehicle there with 
the accelerator pedal. This 
could damage the transmission. 
Apply the brakes to hold the 
vehicle in position.

When you are going down a 
steep hill, use a lower shift 
range, along with the brakes, to 
control the vehicle’s speed.

Do not coast downhill in 
Neutral or with the ignition off. 
The brakes could overheat and 

 

you could have an accident.

 

Vehicle Loading

CAUTION

 

Do not load your vehicle in 
excess of the Gross Vehicle 
Weight Rating or either Gross 
Axle Weight Rating. If you do, 
parts on your vehicle could 
break and it could change the 
way your vehicle handles. Over-
loading could result in loss of 
vehicle control and personal 
injury. It can also shorten the 

 

service life of your vehicle.

 

$10araEscaladeEXT  Page 14  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

Uniden BTSC1500 Owner'S Manual preview
BTSC1500
Brand: Uniden Pages: 16
Uniden BTSC1500 User Manual preview
BTSC1500
Brand: Uniden Pages: 20
Vauxhall Ampera Owner'S Manual preview
Ampera
Brand: Vauxhall Pages: 199
Aries P35-2004 Installation Manual preview
P35-2004
Brand: Aries Pages: 3
Ford 2008 Mustang Quick Reference Manual preview
2008 Mustang
Brand: Ford Pages: 2
Chrysler Stratus LHD 1997 Interactive Electronic Service Manual preview
Stratus LHD 1997
Brand: Chrysler Pages: 1534
WABCO TP19108 Installation Manual preview
TP19108
Brand: WABCO Pages: 32
RBP STEALTH POWER RBP-216-SP Installation Manual preview
STEALTH POWER RBP-216-SP
Brand: RBP Pages: 16
HURST STREET SUPER SHIFTER Installation Instructions preview
STREET SUPER SHIFTER
Brand: HURST Pages: 2
Honda 08A06-361-210 Installation Instructions preview
08A06-361-210
Brand: Honda Pages: 4
Pro-gard SAFESTOP SS0005 Installation Manual preview
SAFESTOP SS0005
Brand: Pro-gard Pages: 4
Skoda Superb 2006 Owner'S Manual preview
Superb 2006
Brand: Skoda Pages: 281
v.LOGiC V5-CIC-E-PNP Manual preview
V5-CIC-E-PNP
Brand: v.LOGiC Pages: 22
JBL smartbase Quick Start Manual preview
smartbase
Brand: JBL Pages: 12
Honda 08V31-TE0-100A Installation Instructions Manual preview
08V31-TE0-100A
Brand: Honda Pages: 10
Hella 2DA 008 136-031 Mounting Instructions preview
2DA 008 136-031
Brand: Hella Pages: 2
PEUGEOT BOXER 2018 Handbook preview
BOXER 2018
Brand: PEUGEOT Pages: 232
Summit Racing SUM-G1083 Assembly & Use Instructions preview
SUM-G1083
Brand: Summit Racing Pages: 11

Brands by name

Popular brands

Load more brands