manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

399 . . .

–

–

–

–

–

Section 

5

■ 

IF YOUR VEHICLE GETS 

STUCK

If your vehicle gets stuck in sand, 
mud, ice or snow, you will need to 
spin the wheels.

Do not, however, spin the wheels 
too fast.

CAUTION

If you let your tires spin at high 
speed, they could explode. You 
or others could be injured. Also, 
the transmission or other parts 
of the vehicle could overheat 
and cause an engine fire or 
other damage.

If the vehicle gets stuck, spin 
the wheels as little as possible. 
Do not spin the wheels above 
55 km/h, as shown on the 
speedometer.

NOTICE

Spinning the wheels can 
destroy parts of the vehicle, 
including the tires.

Spinning the wheels too fast 
while shifting the transmission 
back and forth could destroy 
the transmission.

For information about using tire 
chains on your vehicle, see "Tire 
Chains" under "Tires" in Section 4.

Rocking Your Vehicle

To free your vehicle when it is 
stuck:

1. Turn the steering wheel left 

and right to clear the area 
around the front wheels.

2. Press the Stabilitrak button to 

turn the system off.

See "Stabilitrak System" in 
Section 1 for information on 
the Stabilitrak system.

3. Shift the transmission back 

and forth between 

R

 (Reverse) 

and a forward gear, spinning 
the wheels as little as possible.

Wait until the wheels stop 
spinning before shifting gears.

Release the accelerator pedal 
while you shift and press it 
lightly when in gear.

$10araEscaladeEXT  Page 399  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

DAF PACCAR PACMOBILE 20 User Manual preview
PACCAR PACMOBILE 20
Brand: DAF Pages: 18
Uebler X21 nano Mounting And Operating Instructions preview
X21 nano
Brand: Uebler Pages: 56
PAC GM1A-R Quick Start Manual preview
GM1A-R
Brand: PAC Pages: 4
TBC 645624 Instruction Manual preview
645624
Brand: TBC Pages: 12
Prorack K194 Fitting Instructions For Basic Carrier preview
K194
Brand: Prorack Pages: 14
BMW E46/2 Coupe Manual preview
E46/2 Coupe
Brand: BMW Pages: 55
Whispbar K496W Fitting Instructions Manual preview
K496W
Brand: Whispbar Pages: 15
Harman Kardon DP 2US Quick Start Manual preview
DP 2US
Brand: Harman Kardon Pages: 16
TATA Motors TIAGO XZ 2019 Owner'S Manual preview
TIAGO XZ 2019
Brand: TATA Motors Pages: 184
B&G electronics PW-50C Civilian Installation And Operation Manual preview
PW-50C Civilian
Brand: B&G electronics Pages: 7
Metra Electronics 99-5819 Installation Instructions Manual preview
99-5819
Brand: Metra Electronics Pages: 8
Beper P205DIF100 Manual preview
P205DIF100
Brand: Beper Pages: 52
MVG 0845 C Manual preview
0845 C
Brand: MVG Pages: 18
Elinchrom ELB 1200 User Manual preview
ELB 1200
Brand: Elinchrom Pages: 101
Volvo 1989 780 Owner'S Manual preview
1989 780
Brand: Volvo Pages: 123
Jeep WRANGLER 2017 User Manual preview
WRANGLER 2017
Brand: Jeep Pages: 292
Horn Tools HJIMRR02FIT Mounting Instructions preview
HJIMRR02FIT
Brand: Horn Tools Pages: 12
Dodge CHALLENGER HELLCAT 2017 Owner'S Manual preview
CHALLENGER HELLCAT 2017
Brand: Dodge Pages: 484

Brands by name

Popular brands

Load more brands