manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

Instrumentation and Controls

. . . 28

5. Speedometer

The speedometer displays the 
vehicle's speed.

The reading will be indicated 
in metric units of km/h (kilo-
meters per hour) or MPH 
(Miles Per Hour).

You can use the Driver 
Information Center to change 
your display's readings 
between English and metric 
units.

See "Vehicle Information 
Menu" later in this section for 
more information.

6. Fuel Gage

The fuel gage shows how 
much fuel is in the fuel tank. 
The fuel gage works only when 
the ignition switch is on.

When the gage first indicates 
empty there is still a little fuel 
left, but you should refill the 
tank as soon as possible.

If the fuel is low, the 

FUEL 

LEVEL LOW

 (fuel level low) 

message will appear on the 
Driver Information Center 
display.

A chime will also sound if the 
fuel is low.

See "Driver Information Center 
Messages" later in this section 
for more information.

The arrow on the gage 
indicates the side of the vehicle 
where the fuel door is located.

7. Tachometer

The tachometer displays the 
engine speed in thousands of 
revolutions per minute (RPM).

8. Driver Information Center 

Display

See "Driver Information 
Center" later in this section for 
information.

$10araEscaladeEXT  Page 28  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

A-Tach Mounts 50131 Instructions preview
50131
Brand: A-Tach Mounts Pages: 2
Westin 23-3130 Instructions preview
23-3130
Brand: Westin Pages: 3
Ford E-Transit 2022 Manual preview
E-Transit 2022
Brand: Ford Pages: 22
Audi A4 2016 Quick Questions And Answers preview
A4 2016
Brand: Audi Pages: 9
Belkin WIC004 Setting Up preview
WIC004
Brand: Belkin Pages: 4
Caltrend CV445 Installation Instructions preview
CV445
Brand: Caltrend Pages: 2
Audiovox EM-2201 Installation Instructions preview
EM-2201
Brand: Audiovox Pages: 1
EGR EGR-3PVE-COLOUR Installation Instructions Manual preview
EGR-3PVE-COLOUR
Brand: EGR Pages: 28
Scosche BTFREQ PRO BTFMPD3SR Manual preview
BTFREQ PRO BTFMPD3SR
Brand: Scosche Pages: 16
Saab 2008 9-5 Owner'S Manual preview
2008 9-5
Brand: Saab Pages: 288
Sunsky S-GPS-0142 User Manual preview
S-GPS-0142
Brand: Sunsky Pages: 9
Saab 12 787 887 Installation Instructions Manual preview
12 787 887
Brand: Saab Pages: 12
Ford 2004 Freestar Workshop Manual preview
2004 Freestar
Brand: Ford Pages: 8
Intec CVD500LCD Installation And Operation Manual preview
CVD500LCD
Brand: Intec Pages: 16
A-Tach 50092 Quick Start Manual preview
50092
Brand: A-Tach Pages: 2
METRON PC05T User Manual preview
PC05T
Brand: METRON Pages: 4
Fabbri BICI OK 2 Manual preview
BICI OK 2
Brand: Fabbri Pages: 32
Whelen Engineering Company SAK34 Installation Manual preview
SAK34
Brand: Whelen Engineering Company Pages: 2

Brands by name

Popular brands

Load more brands