manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

Seats and Restraints

. . . 222

Anchors for Child 
Restraints with Lower 
Attaching Points and Top 
Strap

This system is designed to make 
installation of child restraints 
easier.

Use this system instead of the 
vehicle’s safety belts to secure a 
child restraint.

With this feature, you will have 
anchors 

 where the seatback 

meets the seat cushion in the 
center and right side second row 
seats.

To use the system, you need either 
a forward-facing child restraint 
that has attaching points 

 at its 

base (and possibly a top strap), or 
a rear-facing child restraint that 
has attaching points 

 at its base.

CAUTION

If a child restraint is not 
attached to its anchorage 
points, the restraint will not be 
able to protect a child sitting 
there. In a crash, the child could 
be seriously injured or killed.

Make sure that the child 
restraint is properly installed 
using the anchorage points, or 
use the vehicle's safety belts to 
secure the restraint. Follow the 
instructions that come with the 
restraint.

See "Child Restraints" earlier in this 
section.

Also, see "Securing a Child 
Restraint with Lower Attaching 
Points and Top Strap" later in this 
section.

A

B

A

$10araEscaladeEXT  Page 222  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

Jacobsen Cushman Turf Truckster Parts & Maintenance Manual preview
Cushman Turf Truckster
Brand: Jacobsen Pages: 210
Air Lift WirelessAIR 73000EZ Manual preview
WirelessAIR 73000EZ
Brand: Air Lift Pages: 12
Gatorback Mudflaps GCR53F Mounting Diagram & Instructions preview
GCR53F
Brand: Gatorback Mudflaps Pages: 4
Webasto CC4E Installation And Service Instructions Manual preview
CC4E
Brand: Webasto Pages: 34
Omix-Ada Alloy Rugged Ridge X-Clamp Manual preview
Alloy Rugged Ridge X-Clamp
Brand: Omix-Ada Pages: 2
Dodge 8W-70 Wiring Diagram preview
8W-70
Brand: Dodge Pages: 3
Cadillac Fleetwood Brougham Sedan 1966 Owner'S Manual preview
Fleetwood Brougham Sedan 1966
Brand: Cadillac Pages: 56
Brodit ProClip 854676 Quick Start Manual preview
ProClip 854676
Brand: Brodit Pages: 2
Great day UVFR751 Instructions For Installation And Use preview
UVFR751
Brand: Great day Pages: 5
Kolpin 1466 Product Instructions preview
1466
Brand: Kolpin Pages: 6
Brodit Heavy Duty ProClip Installation Instructions preview
Heavy Duty ProClip
Brand: Brodit Pages: 2
Chrysler DODGE AD100 1993 Service Manual preview
DODGE AD100 1993
Brand: Chrysler Pages: 1502
Curt Group Retrac 207700 Installation Manual preview
Retrac 207700
Brand: Curt Group Pages: 4
Jeep GRAND CHEROKEE 4xe 2023 Owner'S Manual preview
GRAND CHEROKEE 4xe 2023
Brand: Jeep Pages: 440
Chrysler 200 Sedan 2012 Specifications preview
200 Sedan 2012
Brand: Chrysler Pages: 6
Kia e-niro Emergency Rescue Manual preview
e-niro
Brand: Kia Pages: 25
Toyota Prius V 2013 Quick Reference Manual preview
Prius V 2013
Brand: Toyota Pages: 32
Toyota PRIUS V 2016 Quick Reference Manual preview
PRIUS V 2016
Brand: Toyota Pages: 40

Brands by name

Popular brands

Load more brands