Cadillac Escalade EXT Owner'S Manual Download Page 47

Page: 47 / 402

47 . . .

–

Section

• AVERAGE SPEED (average

speed)

This display shows the
vehicle’s average speed.

The reading will be indicated
in metric units of km/h (kilome-
ters per hour) or MPH (Miles
Per Hour).

Vehicle Information Menu

Press this button to access the
vehicle information menu.

A blank page ends this menu.

Pressing this button repeatedly will
allow you to scroll through the
following displays:

•

OIL LIFE REMAINING

(oil life

remaining)

This display shows the percent-
age of oil life remaining since
the system was last reset.

If, for example, you see

95%

that means that the way you
are driving your vehicle, 95%
of the current oil life remains.

How frequently you have to
change the oil depends on
your driving patterns, engine
rpm and engine temperature.

It is the owner's responsibility
to check the engine oil level
regularly.

See "Engine Oil" in Section 4
for more information.

When the remaining oil life is
low, the

CHANGE ENGINE OIL

SOON

(change engine oil

soon) message will appear.

After the oil change message
comes on, change the engine
oil as soon as possible within
the next 1000 km.

$10araEscaladeEXT Page 47 Wednesday, October 14, 2009 9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Search results

Summary of Contents for Escalade EXT

Reviews:

Related manuals for Escalade EXT

Brands by name

Popular brands

Cadillac Escalade EXT, Owner'S Manual

Search results

Summary of Contents for Escalade EXT

Reviews:

Related manuals for Escalade EXT

Brands by name

Popular brands