Cadillac Escalade EXT Owner'S Manual Download Page 338

Page: 338 / 402

Service and Maintenance

. . . 338

8. Set the tire pressures to the

correct level.

See the tire information label
for your vehicle's tire inflation
specifications.

9. Be sure to put the valve caps

back on the valve stems. They
help prevent leaks by keeping
out dirt and moisture.

SERVICE TIRE MONITOR

SYSTEM

(service tire monitor

system) appears on the Driver
Information Center display, the
tire matching process was not
completed successfully. Repeat the
procedure.

See your dealer for additional
assistance if needed.

INSPECTION AND
ROTATION

Check your tires and wheels
regularly for unusual wear or
damage.

Make sure the spare tire is secured
properly.

See the following for more
information:

• Changing a Flat Tire

- Storing Tire and Jacking

Equipment

To make your tires last longer,
have them inspected and rotated
at the mileages recommended in
your Maintenance Schedule.
Follow the diagram above.

After rotation, adjust the front and
rear tire pressures according to the
tire information label.

Don’t include the spare tire in your
tire rotation.

If you rotate your tires or replace
any of your tires or tire pressure
sensors, the tire pressure monitor
will need to be reset.

See "Tire Pressure Monitor"
earlier in this section for more
information.

$10araEscaladeEXT Page 338 Wednesday, October 14, 2009 9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Search results

Summary of Contents for Escalade EXT

Reviews:

Related manuals for Escalade EXT

Brands by name

Popular brands

Cadillac Escalade EXT, Owner'S Manual

Search results

Summary of Contents for Escalade EXT

Reviews:

Related manuals for Escalade EXT

Brands by name

Popular brands