manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

Instrumentation and Controls

. . . 60

•

EXIT LIGHTING

 (exit lighting)

This feature allows you to 
designate the length of time 
that the exterior lights stay on 
(when it is dark outside) after 
the ignition is turned off.

Press the 

 button to enter the 

submenu.

While in this submenu, press 
the   button repeatedly to 
scroll through the following 
options:

-

OFF

 (off)

The exterior lights will not 
stay on.

-

30 SECONDS

 (30 seconds)

This is the default setting.

-

1 MINUTE

 (1 minute)

-

2 MINUTES

 (2 minutes)

-

NO CHANGE

 (no change)

Once the desired setting is 
displayed, press the 

 button 

to select it.

You may now either exit pro-
gramming mode or program 
the next available feature.

To exit programming mode, 
see "Exiting Programming 
Mode" later in this section.

•

APPROACH LIGHTING

 

(approach lighting)

This feature allows you to 
program the exterior lights to 
turn on or remain off when you 
use the Remote Keyless Entry 
transmitter to unlock your 
vehicle while it is dark outside.

Press the 

 button to enter the 

submenu.

While in this submenu, press 
the   button repeatedly to 
scroll through the following 
options:

-

OFF

 (off)

The perimeter lights will not 
turn on when you unlock the 
vehicle using the remote key-
less entry transmitter.

$10araEscaladeEXT  Page 60  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
Yakima K674 Instructions Manual preview
K674
Brand: Yakima Pages: 13
Menabo 000081000000, Fitting Instructions Manual preview
000081000000,
Brand: Menabo Pages: 11
Cadillac 2007 CTS Owner'S Manual preview
2007 CTS
Brand: Cadillac Pages: 518
Opel OPEL INSIGNIA Infotainment Manual preview
OPEL INSIGNIA
Brand: Opel Pages: 141
Nav TV PCM3CAM Install Manual preview
PCM3CAM
Brand: Nav TV Pages: 4
TATA Motors Sumo Victa EX Owner'S Manual & Service Book preview
Sumo Victa EX
Brand: TATA Motors Pages: 92
U.S. General 96524 Set Up And Operating Instructions Manual preview
96524
Brand: U.S. General Pages: 8
Westfalia 305 158 Mounting Instructions preview
305 158
Brand: Westfalia Pages: 10
iArmor EDGE IA-W208 Manual preview
EDGE IA-W208
Brand: iArmor Pages: 6
KEKO K617 Installation Description preview
K617
Brand: KEKO Pages: 3
Movon MDAS-5 Installation Manual preview
MDAS-5
Brand: Movon Pages: 43
Rugged Ridge 53701.52 Installation Manual preview
53701.52
Brand: Rugged Ridge Pages: 5
RBO IT FITS RBO1018 Product Manual preview
IT FITS RBO1018
Brand: RBO Pages: 36
Volvo XC60 2014 Wiring Diagrams preview
XC60 2014
Brand: Volvo Pages: 362
SSV Works RG4-DM3 Manual preview
RG4-DM3
Brand: SSV Works Pages: 2
Crux RVCFD-79 Manual preview
RVCFD-79
Brand: Crux Pages: 10

Brands by name

Popular brands

Load more brands