manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

Problems on the Road

. . . 388

When you reinstall the full-size 
wheel and tire, you must also 
reinstall the center cap, if 
equipped. Place the cap on the 
wheel and tap it into place until it 
sits flush with the wheel. The cap 
can only go on one way. Be sure to 
line up the tab on the center cap 
with the indentation on the wheel.

Restow tire and jacking equipment 
in reverse order as removal. Be 
sure the tire valve is pointed down 
and to the rear.

See "Storing Tire and Jacking 
Equipment" later in this section for 
more information.

CAUTION

Storing a jack, a tire or other 
equipment in the passenger's 
compartment of the vehicle 
could cause injury. In a sudden 
stop or collision, loose 
equipment could strike 
someone. Store all these in the 
proper place.

Storing Tire and Jacking 
Equipment

Tire Storage

NOTICE

Storing an aluminum wheel 
with a flat tire under the vehicle 
for an extended period of time 
with the valve pointing up 
could damage the wheel. 
Always stow the wheel with the 
valve stem pointing down and 
have the tire repaired as soon as 
possible.

$10araEscaladeEXT  Page 388  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

Warrior Products 3860 Quick Start Manual preview
3860
Brand: Warrior Products Pages: 2
Aries P35-2004 Installation Manual preview
P35-2004
Brand: Aries Pages: 3
Saab 2008 9-5 Owner'S Manual preview
2008 9-5
Brand: Saab Pages: 288
Sunsky S-GPS-0142 User Manual preview
S-GPS-0142
Brand: Sunsky Pages: 9
Yakima Prorack K436 Fitting Instructions Manual preview
Prorack K436
Brand: Yakima Pages: 13
E&G Classics 1409-0102-10 Installation Instructions preview
1409-0102-10
Brand: E&G Classics Pages: 3
v.link VL2-MBN2 Manual preview
VL2-MBN2
Brand: v.link Pages: 12
Broadfeet RSLX-385-68S Installation Instructions preview
RSLX-385-68S
Brand: Broadfeet Pages: 2
Rugged Ridge 11232.20 Quick Start Manual preview
11232.20
Brand: Rugged Ridge Pages: 2
RBO IT FITS RBO1018 Product Manual preview
IT FITS RBO1018
Brand: RBO Pages: 36
KLAUS Multiparking trendvario6X00 Service Manual preview
trendvario6X00
Brand: KLAUS Multiparking Pages: 72
GMC 2008 Savana Van Owner'S Manual preview
2008 Savana Van
Brand: GMC Pages: 402
Volkswagen 1963 1500 Instruction Manual preview
1963 1500
Brand: Volkswagen Pages: 68
Porsche 92854 Owner'S Manual preview
92854
Brand: Porsche Pages: 145
Carbest 47804 Instruction Manual preview
47804
Brand: Carbest Pages: 64
Honda 08F53-T0A-100 Installation Instructions preview
08F53-T0A-100
Brand: Honda Pages: 2
Nav TV MOST-HUR31 Manual preview
MOST-HUR31
Brand: Nav TV Pages: 8
Haltech NEXUS R3 Quick Start Manual preview
NEXUS R3
Brand: Haltech Pages: 13

Brands by name

Popular brands

Load more brands