manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

Instrumentation and Controls

. . . 180

Problems with the Parking 
Assist System

If a temporary condition exists that 
prevents the system from turning 
on automatically, the 

PARKING 

ASSIST OFF

 (parking assist off) or 

PARKING ASSIST BLOCKED SEE 
OWNERS MANUAL

 (parking 

assist blocked see owners manual) 
message will appear in the Driver 
Information Center when you shift 
to R (Reverse).

This message may appear under 
the following conditions:

• The system is disabled 

manually.

• The system sensors or the rear 

bumper are damaged.

• A bicycle or other object is 

attached to the rear of the 
vehicle.

• An object is hanging out of the 

tailgate.

• A trailer hitch or a trailer hitch 

with a trailer is attached to the 
vehicle.

• A tow bar is attached to the 

vehicle.

• The system receives vibrations 

from a large nearby vehicle or 
from heavy equipment such as 
a jackhammer.

The message will remain in the 
Driver Information Center display 
until conditions are back to 
normal.

If the message does not turn off 
when conditions are back to 
normal, the vehicle must be driven 
forward at a minimum speed of 
40 km/h.

Otherwise, if the message is still 
displayed, there may be a problem 
with the system. The sensors may 
need to be cleaned.

If, after cleaning the rear bumper 
and sensors and driving forward at 
a minimum speed of 40 km/h, the 
message still appears, see your 
dealer for service.

See the following under "Driver 
Information Center" earlier in this 
section for more information:

• Driver Information Center 

Messages

-

SERVICE PARKING ASSIST

 

(service parking assist)

$10araEscaladeEXT  Page 180  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

Waeco MagicWatch MWE800 Installation And Operating Manual preview
MagicWatch MWE800
Brand: Waeco Pages: 212
Mercedes-Benz R-Class Owner'S Manual preview
R-Class
Brand: Mercedes-Benz Pages: 373
Porsche 01-B Web Application Manual preview
01-B
Brand: Porsche Pages: 313
Whelen Engineering Company FastTrax FTF4 Installation Manual preview
FastTrax FTF4
Brand: Whelen Engineering Company Pages: 9
JCROffroad JEEP GL ADIATOR JT TOPPER ROOF RACK Install Instructions Manual preview
JEEP GL ADIATOR JT TOPPER ROOF RACK
Brand: JCROffroad Pages: 7
Vecow IVH-9000-2R440Q User Manual preview
IVH-9000-2R440Q
Brand: Vecow Pages: 110
Racelogic Speed & Route Profiler Manual preview
Speed & Route Profiler
Brand: Racelogic Pages: 24
BrandMotion FLTW-7511 Installation Manual preview
FLTW-7511
Brand: BrandMotion Pages: 6
Ford Escape 2022 Owner'S Manual preview
Escape 2022
Brand: Ford Pages: 585
Belkin TuneBase F8Z442 User Manual preview
TuneBase F8Z442
Brand: Belkin Pages: 162
Blue Ox BX1120 Installation Instructions preview
BX1120
Brand: Blue Ox Pages: 5
Tactik Tube Doors Installation & Use Instructions preview
Tube Doors
Brand: Tactik Pages: 4
banks 61410 Owner'S Manual preview
61410
Brand: banks Pages: 76
Volkswagen Zubehör 000 071 105 D Installation Instructions Manual preview
000 071 105 D
Brand: Volkswagen Zubehör Pages: 133
Hyundai TUCSON 2022 Quick Reference Manual preview
TUCSON 2022
Brand: Hyundai Pages: 32
HAKR HV1160 Quick Start Manual preview
HV1160
Brand: HAKR Pages: 2
Ford B-MAX Quick Reference Manual preview
B-MAX
Brand: Ford Pages: 17
Enduro EM303 User Manual preview
EM303
Brand: Enduro Pages: 56

Brands by name

Popular brands

Load more brands