manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

Instrumentation and Controls

. . . 130

• Press and hold the plus (+) 

button. You can hold it there 
while you accelerate to the 
new speed. When the vehicle 
has reached the chosen speed, 
release the button. The vehicle 
will now maintain the higher 
speed.

• Tapping the switch will 

increase your vehicle's speed by 
1.6 km/h for each tap.

To Go to a Slower Speed

• Press and hold the 

SET

 button.

Your vehicle will slow down. 
When it gets to the lower 
speed you want, let go of the 
button. The vehicle will 
maintain the lower speed.

• Tapping the button will lower 

your vehicle’s speed by 
1.6 km/h for each tap.

To Pass Another Vehicle When 
You're in Cruise Control

Just use the accelerator pedal 
when you need more speed. When 
you take your foot off the pedal, 
the vehicle will go back down to 
your previously chosen cruise 
control speed and stay there.

RES

SET

RES

SET

$10araEscaladeEXT  Page 130  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

Suzuki SX4 SEDAN 2008 Owner'S Manual preview
SX4 SEDAN 2008
Brand: Suzuki Pages: 16
Ranger design 5044 Installation Manual preview
5044
Brand: Ranger design Pages: 6
Eaton Green Motion DC 22 Training preview
Green Motion DC 22
Brand: Eaton Pages: 65
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Yakima K800 Instructions Manual preview
K800
Brand: Yakima Pages: 8
FVC Sprinter Bed System Adventure Wagon Kit Installation Manual preview
Sprinter Bed System Adventure Wagon Kit
Brand: FVC Pages: 8
Ford E-Transit 2022 Manual preview
E-Transit 2022
Brand: Ford Pages: 22
Hama 00201510 Operating Instructions Manual preview
00201510
Brand: Hama Pages: 40
Kargo Master 4A82T Installation Manual preview
4A82T
Brand: Kargo Master Pages: 6
Alfa Romeo Alfa 147 Quick Start Manual preview
Alfa 147
Brand: Alfa Romeo Pages: 8
BMW M5 2014 Service And Warranty Information preview
M5 2014
Brand: BMW Pages: 38
Calitop Calispace Ocean 80 Assembly Instructions preview
Calispace Ocean 80
Brand: Calitop Pages: 5
Sears 580.32601 Owner'S Manual preview
580.32601
Brand: Sears Pages: 41
Subaru 360 Sedan Service Manual preview
360 Sedan
Brand: Subaru Pages: 16
ULTIMATE SPEED 279746 Assembly And Safety Advice preview
279746
Brand: ULTIMATE SPEED Pages: 6
TrailFX 2123131 Quick User Manual preview
2123131
Brand: TrailFX Pages: 2
Bilstein E4-WM5-Y479A00 Mounting Instruction preview
E4-WM5-Y479A00
Brand: Bilstein Pages: 7

Brands by name

Popular brands

Load more brands