Cabletron Systems SSR-GLX19-02, User Manual

Page: 434 / 495

Chapter 21: Checking the Status of QoS Tables
434 CoreWatch User’s Manual
upper frame. For details on using the Table toolbar, see Appendix A: “Working with
Tables” on page 443 .
Table 73. Flow Priority table fields
Field Description
Flow Name Identifies which flow is assigned the traffic priority shown in
the IP flow's Priority field.
Priority Indicates the traffic priority assigned to the flow. The value of
this field will be control, high, medium, or low. It specifies
how much priority is given to data that matches the criteria set
through the flow's parameters. Packets assigned the control
priority are transmitted first.
Interface Indicates which IP interfaces are given priority in the flow. The
value ANY indicates that all interfaces are accepted for this
field.
Protocol Indicates which transport layer protocol (TCP or UDP) is
given priority in the flow.
When configuring the SSR, the network administrator can set
this field to
any for packets with the protocol set to TCP or
UDP if the other fields match.
Source Address Indicates the source IP addresses and network masks given
priority in the flow. The value ANY indicates that all addresses
and masks are accepted for this field. The value
255.255.255.255 signifies that no mask entry was specified
when this field was set.
Source Port Indicates the source TCP or UDP port given priority in the
flow. The value ANY indicates a wildcard.
Destination Address Indicates the destination IP address and network mask given
priority in the flow. The value ANY indicates that any address
and mask are accepted for this field. The value 255.255.255.255
signifies that no mask entry was specified when this field's
priority was set.
Destination Port Indicates the destination TCP or UDP port given priority in the
flow. The value ANY indicates that all such ports have priority.
TOS Indicates the TOS given priority in the flow.