Cabletron Systems SSR-GLX19-02, User Manual

Page: 352 / 495

Chapter 16: Configuring Routing Policies on the SSR
352 CoreWatch User’s Manual
Note: If you select the Match Length Between <number> and <number> option,
you must specify values defining the acceptable range to justify a match
to your network mask. You can specify values between 0 and 32 for the
acceptable length.
16. Specify whether or not you wish to restrict redistribution of routes that match your
defined filter by turning the Restrict redistribution of routes matching the filter option on
or off, accordingly.
17. If you wish, you can specify a route metric for the filter network by entering a value
between 0 and 255 in the Route Metric box.
18. If you wish to specify additional filter networks, be sure to activate the Add more filters
option, click Next , and repeat step 14 through step 17 . Otherwise, click Finish .
Modifying Aggregate Policies
You can modify aggregate policies to change the filter and/or network specifications for
one or more aggregate sources associated to a particular aggregate destination.
To modify an existing aggregate policy:
1. Start Configuration Expert if you have not already done so.
2. Open the configuration file you want to modify and then double-click that file’s
Routing Configuration object.
3. Double-click the IP Routing Configuration object.
4. Double-click the IP Unicast Routing object.
5. Double-click the Routing Policy Configuration object.
6. Double-click the Aggregate Policies object.
7. Double-click the name of the existing aggregate policy you wish to modify.
Once the list of existing aggregate sources for this policy is displayed, double-click the
aggregate source object you wish to modify.
8. Do one of the following:
– Double-click the Filters object and then select the name of the aggregate source
filter you wish to modify.
– Double-click the Network Specification object and then select the name of the
aggregate source network you wish to modify.
9. Modify the attributes of the aggregate source filter and/or network by editing the
fields of the
Aggregate Policy Filter dialog box or Filter Network Specification
dialog box that appears.