Cabletron Systems SSR-GLX19-02, User Manual

Page: 100 / 495

Chapter 7: Configuring VLANs on the SSR
100 CoreWatch User’s Manual
Figure 47. Expanded Update Port list panel (port-based)
b. Click the Add button.
Configuration Expert moves the selected port from the Available Port list to the
corresponding module in the Selected Port list.
If you accidentally add a port that you do not want to include in the VLAN, you
may remove it by double-clicking that port’s module in the
Selected Port list. From
the list of ports that appears, select the port you do not want in the VLAN. Then
click the
Remove button.
10. Continue selecting ports and clicking the Add button until you have added all the
ports you want the VLAN to include.
Clicking a module rather than double-clicking it in a list box selects all of the module’s
ports in that list box. This is a quick way to select all of a module’s ports if you want to
add or remove them all at the same time.
11. Click Finish .
Configuration Expert adds the new VLAN to the VLANs found in the Port Based
VLANs object.
Modifying VLANs
You can modify any VLAN’s name, ID, and the ports included in a VLAN. On a protocol-
based VLAN you can also modify the protocols bound to that VLAN. Separate