Cabletron Systems SSR-GLX19-02, User Manual

Page: 451 / 495

CoreWatch User’s Manual 451
Appendix B: CoreWatch Menus
Routing State Submenu
If you select the Monitor menu and then choose Routing State, the Routing State submenu
appears. That submenu provides access to the additional submenus listed in the following
table. The table describes the commands available on these additional submenus.
Table 81. Routing State submenu commands
Submenu Command Description
IP State IP Interface Table Displays information about which port
each IP interface uses and provides
address information about those
interfaces.
IP Forwarding Table Displays information about the routes
used by the IP interfaces on an SSR
IPX State IPX Interface Table Displays information about packets sent
from an SSR's IPX interfaces, and
indicates which WAN router each of those
interfaces may use.
IPX Forwarding Table Displays information about the routes
used by the IPX interfaces on an SSR.
OSPF State OSPF Interface Table Displays information about the routes,
status, authentication, and other details
about each OSPF interface on an SSR
OSPF Area Table Displays information about the different
areas defined for an OSPF autonomous
system.
OSPF Neighbor Table Displays information about the
neighboring routers of an SSR.
OSPF Link State DB Table Displays information about the link-state
advertisements of the areas to which the
SSR is attached.
OSPF Area Aggregate
Table Displays information about the IP
addresses and TOS that are used by OSPF
to determine the destination of packets.
RIP State RIP Interface Table Displays information about how many
packets on a RIP interface the SSR
discarded, how many route entries of
valid RIP packets the SSR ignored, how
many RIP updates the SSR has sent on the
interface, and whether a RIP interface is
functioning.