Cabletron Systems SSR-GLX19-02, User Manual

Page: 114 / 495

Chapter 8: Configuring IP Interfaces for the SSR
114 CoreWatch User’s Manual
a. In the
Available Port
list, double-click the module containing the desired port.
From the list of available ports that appears, select the port that you want to bind
to the interface.
b. Click the
Add
button.
Note: You can bind only a single port to an interface. If you need to bind multiple
ports to the interface, create a VLAN consisting of those ports and bind the
interface to that VLAN.
13. Click Next .
The Apply ACLs panel appears.
Figure 56. Apply ACLs panel (single port)
14. Specify whether you want to apply an ACL to the interface by doing one of the
following:
– To not apply an ACL, select No and then click Finish . This completes the
configuration of the interface.
Configuration Expert adds the new interface to those found in the IP interfaces
bound to Ports object.
– To apply an ACL to the interface, select Yes and click Next .
Note:
You will be able to apply an IP ACL while creating an interface only if
you previously created the ACL. If you plan to apply an ACL that you
have not defined yet, finish creating the interface. Then configure the