Cabletron Systems SSR-GLX19-02, User Manual

Page: 234 / 495

Chapter 13: Configuring Security on the SSR
234 CoreWatch User’s Manual
7. Enter the filter’s name, source MAC address, and VLAN ID in the appropriate text
boxes.
8. Click Next . In the Bind to Port panel that appears, specify to which ports you want to
apply the filter. If you apply a port address lock filter to a port, you can use a static-
entry filter to allow packets from a specific source to use that port even though it is
locked.
Figure 152. Bound Port List panel (lock filter)
If you want to apply the filter to a port, double-click that port’s module in the
Available Port list, select the port from the port list that appears, and click the Add
button.
Clicking a module rather than double-clicking it selects all of that module’s ports. This
is a quick way to apply the filter to all of a module’s ports.
If you accidentally add a wrong port, remove it by selecting it in the Selected Port list
and clicking the Remove button.
9. Click Finish .
Configuration Expert adds the filter to those found in the L2 Port Address Lock Filters
object. The ports to which the filter applies are included in that filter’s Bound Port List
object.
Configuring Layer-2 Static-Entry Filters
Static-entry filters allow or force traffic to go to a set of destination ports based on a
frame’s source MAC address, destination MAC address, or both source and destination