Cabletron Systems SSR-GLX19-02, User Manual

Page: 332 / 495

Chapter 16: Configuring Routing Policies on the SSR
332 CoreWatch User’s Manual
9. Specify the name you wish to assign to the filter in the Filter Name box.
10. Click Next .
A Filter Network Specification panel similar to the following appears:
Figure 214. Filter Network Specification panel
11. Specify the level of route access by selecting the All Routes option, the Default Route
option, or the IP Network/Host option.
If you select the IP Network/Host option, you can then proceed with the following step.
Otherwise, skip to step 13 .
12. Under Network/Host Options , define the following characteristics:
a. Specify the network or host IP address and the network mask for your filter
network in the
Network/Host Address and Network Mask boxes, respectively.
b. If the IP address you specify in the Network/Host Address box points to an IP
host, activate the Supplied Address Specifies an IP Host option and skip to step 13 .
Otherwise, continue to the next step.
c. Under Network Mask Matching Criteria , select the appropriate option to fulfill your
mask-matching requirements.
You can select one of the following four options:
– Ignore Mask of Destination
– Exact Match with Supplied Mask