Cabletron Systems SSR-GLX19-02, User Manual

Page: 264 / 495

Chapter 14: Configuring OSPF on the SSR
264 CoreWatch User’s Manual
Figure 177. OSPF Area Stub Host panel
To add a stub host, take the following steps:
a. Enter the address of the stub host.
b. Enter an integer value from 0 to 65535 to specify the cost that should be
advertised for the directly attached stub host.
c. To add another stub host, select the Add More Stub Hosts check box, click Next ,
and then repeat step a and step b until you add all the appropriate stub hosts.
16. If you are configuring the backbone area and you need to define virtual links, do so by
taking the following steps. Otherwise, skip to step 17 .
Note:
In order to specify a Virtual Link, you must have previously configured at
least one non-backbone area.
a. Click Next .