Cabletron Systems SSR-GLX19-02, User Manual

Page: 215 / 495

CoreWatch User’s Manual 215
Chapter 13: Configuring Security on the SSR
Figure 135. IPX ACL Rule panel
9. If you want to permit IPX traffic that meets the rule’s criteria, select the Permit option.
Otherwise, block such traffic by selecting the Deny option.
10. Define the rule’s criteria by specifying values for the fields described in the following
table:
Table 24. IPX ACL rule criteria fields
Field Description
Source Network Enter the source’s network address. You can enter ANY to
specify a wildcard (“don’t care”) condition. The SSR will
interpret this number in hexadecimal format. You do not need
to use a “Ox” prefix.
Source Net Mask Enter the source’s network mask.
This field specifies a group of networks for which the ACL
applies. This mask field is ANDed with the source’s network
address and the source network of the incoming packets to
determine a hit. The SSR will interpret this number in
hexadecimal format. You do not need to use a “Ox” prefix.
Specifying this field is optional. If you do not enter a value in
this field, the SSR uses the hexadecimal value FFFFFFFF.