Cabletron Systems SSR-GLX19-02, User Manual

Page: 302 / 495

Chapter 16: Configuring Routing Policies on the SSR
302 CoreWatch User’s Manual
A
RIP Export Destination
dialog box similar to the following appears:
Figure 196. RIP Export Destination dialog box
9. Specify a name for the export destination in the Destination Name box.
10. Under RIP Routes , specify whether you want to export the routes to a specific interface
or a gateway by doing one of the following:
– To export routes to an interface, select the Exported Over Interfaces option and then
select an IP interface from the associated drop-down list.
– To export routes to a gateway, select the Exported to Gateway option and then
specify IP address for the given gateway in the associated text box.
11. Specify whether the SSR restricts the export route or associates a metric with the
exported route by doing one of the following:
– If you do not want the SSR to export any routes to the destination, select the Restrict
export to the specified RIP destination option.
– If you want the SSR to inform the destination about how far away the SSR is from
the export route, select the route metric to be associated with exported routes.
Select a number from 1 to 16 from the
Default Metric drop-down list or select
Inherited if you want the SSR to use the default metric from the routing policy.
12. Click OK .
13. Repeat step 8 through step 12 until you create all the RIP export destinations you plan
to include in your export policies.