Cabletron Systems SSR-GLX19-02, User Manual

Page: 122 / 495

Chapter 8: Configuring IP Interfaces for the SSR
122 CoreWatch User’s Manual
5. In the list of interfaces that appears, double-click the one you want to modify.
Configuration Expert displays the contents of the object and the Interface Definition
dialog box of the interface.
Figure 65. Interface Definition dialog box
6. If you want to edit the name, interface state, MTU, or MAC encapsulation fields,
specify values as you do when creating an IP interface. Then click
OK .
7. If you want to change the interface’s IP address, IP subnet mask, or broadcast address,
double-click the Bound IP Addresses object, click the interface’s address object, then
enter a new IP address in the Bound Port Address dialog box that appears and click
OK .
8. If you want to bind the interface to a different port or VLAN, do one of the following:
– If you are modifying a port-bound interface, double-click the interface’s Bound
Port List object. Then use the Bound Port List dialog box to remove the currently
bound port and to add the new port. Click
OK
You can add and remove ports from the dialog box’s list boxes as you do when
creating the interface.
– If you are modifying a VLAN-bound interface, click the interface’s VLAN object.
Then select a new VLAN from the
VLAN Name drop-down list that appears in the
Interface Definition dialog box. Click OK .
9. If you want to change which ACLs are applied to the interface, double-click the
Bound IP Security object. Use the
Update ACL List dialog box that appears to add
and remove ACLs.