Cabletron Systems SSR-GLX19-02, User Manual

Page: 310 / 495

Chapter 16: Configuring Routing Policies on the SSR
310 CoreWatch User’s Manual
5. Double-click the Routing Policy Configuration object.
6. Double-click the Building Blocks object.
7. Double-click the Export Source object.
8. Double-click the RIP object, and then do one of the following:
– If you are creating a new export source, click the Configure New RIP Export Source
object.
– If you are modifying an existing export source, select that export source.
A
RIP Export Source
dialog box similar to the following appears:
Figure 201. RIP Export Source dialog box
9. Specify the name you wish to assign to the RIP export source in the Source Name box.
10. Under Export RIP Routes , specify whether the SSR restricts the export or associates a
metric with the exported route by doing one of the following:
– If you do not want the SSR to export any routes from the source, select the Restrict
export from the specified RIP source option.
– If you want the SSR to associate a metric with the exported route, select a metric
from the
Route Metric drop-down list. Select Inherited if you want the route to use
the policy’s default metric. Otherwise, select a number from 1 to 16.
If you do not enter a metric value in this dialog box, the SSR inherits the metric
value from the export destination. If a metric value is not specified for the export
destination, the SSR inherits the default metric specified at the protocol level.