background image

Boat O p eration           

           

            Section 2

2-17

At idle speed, you ca n co ntrol boat direct ion and position by engine gear select ion alone.  With 
both outboard engines faci ng straight ahead:

• 

Y ou ca n rotate the boat to 

p ort 

by shifting the starboard engine into F ORWARD  and the 

port engine into RE V E RS E .

• 

Y ou ca n rotate the boat to 

starb oard

 by shifting the port engine into F ORWARD  and the 

starboard engine into RE V E RS E .

Above idle speed in F ORWARD , you ca n co ntrol boat direct ion with the steering wheel:

• 

Turn the steering wheel in a co unter-cl ockw

ise direct ion to turn to 

p ort

.

• 

Turn the steering wheel in a cl ockw

ise direct ion to turn to 

starb oard

Y ou c an use the engine throttles to greatly incr ease boat response while performing ce rtain slow 
speed turning maneuvers.  To turn q uickl

y to port or starboard at slow speed, turn the steering 

wheel in the direct ion you want to go.  

After

 you have turned the steering wheel, incr ease the 

engine speed and the boat will turn q uickl

y.  It is important to turn the steering wheel 

b efore

 you 

incr ease engine speed, beca use the boat will acce

lerate in the direct ion it is steered.

B acki

ng down, you ca n co ntrol boat direct ion with the steering wheel:

• 

Turn the steering wheel in a co unter-cl ockw

ise direct ion to back 

down to 

p ort

.

• 

Turn the steering wheel in a cl ockw

ise direct ion to back 

down to 

starb oard

.

Summary of Contents for 37 Justice Series























































































































































































































Reviews: