Boston Whaler 37 Justice Series, Operation & Maintenance Manual

Page: 119 / 214

4-47
Boat Systems Section 4
Single Cord Shore Power with Generator
In some ca ses you may be limited to operating your
boat’ s eq uipment using only a single shore power co rd.
The following procedure will provide the most efficient
power to the boat.
1 . S lide the co vers on the panel to expose the
GE NE RATOR & S H ORE P OWE R # 2 breake rs.
2 . M ake sure the breake rs are OF F .
3 . E nsure that AL L co mponent breake rs are OF F .
4 .
sing the shore cord (supplied), connect the female
plug to the boat receptacle first.
5 . Next, co nnect the male plug to the docksi de panel.
6 . F ollow proce dures to start the generator ( allow
the generator to warm up before applying load) .
Remember to run the blower prior to operation.
Single Cord Shore Power, No Generator
The single co rd shore power sce nario descr ibed
previously utilize s the generator to supplement power.
Although this setup provides maximum voltage to your
boat, it req uires use of the generator. B y monitoring your
load, you can still power your boat sufficiently without the
generator and a single co rd by applying the breake rs as
follows:
1 . S lide the co vers on the panel to expose the S H ORE
P OWE R # 1 & B RID GE breake rs.
2 . M ake sure the breake rs are OF F .
3 . E nsure that AL L co mponent breake rs are OF F .
4 .
sing the shore cord, (supplied) connect the female
plug to the boat receptacle first.
5 . Next co nnect the male plug to the docksi de panel.
6 . Turn docksi de panel breake rs ON.
7 . S witch the boat side shore power breake r( s) ON.
8 . It is now safe to turn on co mponent breake rs.
SHORE
POWER 2
ON
GENERATOR BRIDGE
SHORE
POWER 1
ON
ON
ON ON
ON
ON
ON
SHORE
POWER 2
OFF OFF
ON
GENERATOR BRIDGE
SHORE
POWER 1
ON
ON
ON
ON
rolonged e posure to carbon mono ide can
cause serious injury or death. Always ensure
that con ned spaces in your boat have an
adeq uate sup p ly of fresh air.
DANGER