Boston Whaler 37 Justice Series Operation & Maintenance Manual Download Page 67

Page: 67 / 214

3-11

F uel System

Section 3

V ent H ose Rep lacement

Removal

The fuel tank is vented through the fuel fill fitting and fuel

ca p.

L oosen the two hose cl amps and remove the vent hose
from the elbow at the fuel tank. Remove the cl amps from
the vent hose.

L oosen the two hose cl amps and remove the vent hose

from the fuel fill fitting. Remove the clamps from the vent

hose. P ull the vent hose from under the deck

slowly until

it is co mpletely free.

Installation

Route the vent hose under the dec k until it reach es the
elbow on the fuel tank. S ecu re the vent hose to the tank
elbow with two hose cl amps.

Attach the other end of the vent hose to the fuel fill fitting

and secu re with two hose cl amps.

Check your work carefully. F uel leaks can lead to

re or e plosion.

DANGER

Summary of Contents for 37 Justice Series























































































































































































































Search results

Summary of Contents for 37 Justice Series

Reviews:

Related manuals for 37 Justice Series

Brands by name

Popular brands

Boston Whaler 37 Justice Series, Operation & Maintenance Manual

Search results

Summary of Contents for 37 Justice Series

Reviews:

Related manuals for 37 Justice Series

Brands by name

Popular brands