background image

Safety         

  

                           Section 1

1-9

roposition   In ormation

The following information is incl uded in this manual as 
reco mmended by 

California’ s Safe Drinking Water 

and T ox ic Enforcement Act of 19 8 6

, amended through 

P roposition 6 5 .

WARNING

A wide variety of comp onents used on this b oat 
contain or emit chemicals known to the State 
of California to cause cancer,  b irth defects,  and 
other rep roductive harm.

Ex amp les include:

• 

Engine and generator ex haust

• 

Gasoline,  diesel fuel,  coolants,  and motor 
oil

• 

Cooking fuels

• 

Cleaners,  solvents,  and p aint

• 

Waste materials that result from wear of 
b oat comp onents

• 

L ead from b attery terminals and other 
sources

T o avoid harm:

• 

K eep  away from engine,  generator,  and 
cooking fuel ex haust fumes

• 

Wash areas thoroughly with soap  and 
water after handling the sub stances listed 
in this warning

Summary of Contents for 37 Justice Series























































































































































































































Reviews: