Note
Generally, monitoring is not carried out by the terminal but is initiated by the ISP. Your
device then only needs to react correctly to the signals received. This is ensured
without a specific OAM configuration for both flow level 4 and flow level 5.
Two mechanisms are available for monitoring the ATM connection: Loopback Tests and
OAM Continuity Check (OAM CC). These can be configured independently of each other.
Caution
The configuration of OAM requires extensive knowledge of ATM technology and the
way the bintec elmeg devices functions. An incorrect configuration can cause consid-
erable disruption during operation. If applicable, save the original configuration on your
PC.
In the WAN->ATM->OAM Controlling menu, a list of all monitored OAM flow levels is dis-
played.
22.2.3.1 New
Choose the New button to set up monitoring for other flow levels.
Fig. 196:
WAN
->
ATM
->
OAM Controlling
->
New
The menu WAN->ATM->OAM Controlling->New consists of the following fields:
bintec elmeg GmbH
22 WAN
elmeg hybird 120 / hybird 130
457
