Field
Description
•
55 9- ":;$
: Only for point-to-point connections.
•
55 !! #3.
: Only for point-to-point connections.
•
55 "
: Only for point-to-point connections.
Displayed Name
In general, you enter the name to be displayed for this number
in the called system telephone's display.
Für Type of Number =
55 9- ":;$
this field displays
the name of the connection.
Single Number (MSN)
Here, enter the MSN for a point-to-multipoint connection.
P-P Base Number
Here, enter the number for the point-to-point connection
(without direct dial number).
P-P DDI Exception
Here, enter the direct dial exception for a point-to-point connec-
tion.
Note: Only enter the extension according to your extension
number range that should be routed to differing internal sub-
scriber numbers. Direct dial at the point-to-point connection al-
ways proceeds to the subscriber whose number was dialled
along as extension. E. g. the internal subscriber has the number
+
. If this subscriber is called from outside on
)+2+
, the
call is signalled at his telephone. However, if with direct dial
+
a subscriber with the number
,,,
is to be called, enter
,,,
as the exception number. In Incoming Distribution you
then assign the exception number to the subscriber with the
number
+
. You can subsequently perform additional settings in
Incoming Distribution.
P-P Additional MSN
Here, enter an additional MSN for a point-to-point connection.
With some providers, it's possible to also transmit a point-
to-multipoint number on a point-to-point connection in parallel to
the direct dial number; e.g. a fax number pre-existing setup of a
point-to-point connection, or the old point-to-multipoint number.
14.1.3 Trunk Groups
In the Numbering->Trunk Settings ->Trunk Groups menu, you can group the various ex-
ternal connections and individually provide these to the users.
bintec elmeg GmbH
14 Numbering
elmeg hybird 120 / hybird 130
177
