Field
Description
The function is activated by selecting
;
.
The function is disabled by default.
If Call Waiting is enabled, define for which calls you wish to al-
low call waiting.
Possible values:
•
$ -
•
#$ -
•
$ #$ -
Under Repeat Call Waiting Signal, also decide whether the
call waiting tone or the display notification should only be sig-
nalled once, or repeated.
Do not Disturb
Only for telephones in the CS4xx series, the S530 telephones
and S560 and the IP-S400 telephone.
For the S530 and S560 telephones, you merely configure the
function here. With these telephones, enable
! !-
:$;
via the function key.
Select whether you wish to use the call protection (do not dis-
turb) performance feature.
With this performance feature, you can enable call signalling to
your terminal.
Select for which number you wish to use the station guarding
performance feature.
Possible values:
•
$- ":;$ <
(CS4xx series only): Call protection
applies only to the first configured MSN.
•
":;$-
(CS4xx series only): Call protection applies to
all configured MSN's.
Select whether incoming calls shall be signalled:
•
'==
: Calls are signalled.
•
'
(CS4xx series only): Calls are not signalled.
•
3E > <
(CS4xx series only): An at-
29 User Access
bintec elmeg GmbH
662
elmeg hybird 120 / hybird 130
