Field
Description
Choose the priority of the queue. Possible values are
77
.$ $<
to
) > .$ $<
.
The default value is
.
Weight
Only for Prioritisation Algorithm =
A7 :
;
or
A7 $ P::
Choose the priority of the queue. Possible values are
to
)
.
The default value is
.
RTT Mode (Realtime
Traffic Mode)
Active or deactivate the real time transmission of the data.
The function is enabled with
;
.
The function is disabled by default.
RTT mode should be activated for QoS classes in which real
time data has priority. This mode improves latency when for-
warding real time datagrams.
It is possible to configure multiple queues when RTT mode is
enabled. Queues with enabled RTT mode must always have a
higher priority than queues with disabled RTT mode.
Traffic Shaping
Activate or deactivate data rate (=Traffic Shaping) limiting in the
send direction.
The data rate limit applies to the selected queue. (This is not the
limit that can be defined on the interface.)
The function is enabled with
;
.
The function is disabled by default.
Maximum Upload
Speed
Only for Traffic Shaping = enabled.
Enter a maximum data rate for the queue in kbits.
Possible values are
to
.
The default value is
.
Overbooking allowed
Only for Traffic Shaping = enabled.
20 Networking
bintec elmeg GmbH
398
elmeg hybird 120 / hybird 130
