Use the automatic provisioning to use the elmeg hybird to transfer elementary telephony
parameters to the DECT system. If you want to use the assistant First Steps to do this,
you activate the value
5#/!
under Assistants->First steps->Advanced
Settings->Add in the field Transmit Provisioning Server for . Instead of this, you can also
set the fields Option =
8 .$ 6- -$6$
and Value =
7.&//B5
$-- = 7 .$ 6- -$6$C/Q.$ 6
under Local Services->DHCP
Server->DHCP Configuration->New->Advanced Settings.
To register the mobile parts you first set the base station to login mode. Then you do the
registering of the mobile parts on the mobile parts themselves. To configure the base sta-
tion in any more detail, you need to use the DECT system's web configurator.
Select the button
to trigger an update of the device's provisioning. If the update is suc-
cessful, the updated value displays in the Last seen column within 10 seconds.
Note
If you wish to test whether your base station is correctly configured and accessible, se-
lect the button
and check whether an updated value is displayed within 10 seconds
in the Last seen column.
Note
If you wish to change the language currently used with a DECT single-cell system, the
system has to be connected to the provisioning server of the elmeg hybird. You re-
quired an installed SD card. All the languages used need to be stored on the SD card.
Single-cell systems load the language required from the SD card when necessary.
15.1.3.1 General
In the menu Terminals->elmeg System Phones->elmeg DECT->General you make the
basic settings for base stations.
bintec elmeg GmbH
15 Terminals
elmeg hybird 120 / hybird 130
249
