up for a specific number (MSN) on your system telephone. Pressing the key when the
phone is not in use turns call forwarding on and off. Call forwarding configuration over a
programmed key is only possible for numbers 1 to 9 (MSN-1...MSN-9) of the phone. In
order to be able to use call forwarding, you need to have set up at least one number.
•
$>$ 9
: You can set up a key so that call diversion on engaged is
set up for a specific number (MSN) on your system telephone. Pressing the key when the
phone is not in use turns call forwarding on and off. Call forwarding configuration over a
programmed key is only possible for numbers 1 to 9 (MSN-1...MSN-9) of the phone. In
order to be able to use call forwarding, you need to have set up at least one number.
•
3$ :3
: You can configure a key so that by pressing it a saved macro is ex-
ecuted.
The macro function can only be programmed at the phone.
•
(- $
(not with the S5x0): If you've connected and configured a headset to
your telephone over a separate headset socket, operation of the headset occurs over a
function key. Press the headset key to initiate or accept calls. If you already have an act-
ive connection over the headset, you can end the call by pressing the headset key.
•
: 3 53E:.
: Your telephone can accept calls automatically without you
having to lift the receiver or press the loudspeaker key. Automatic call acceptance is
switched on or off using the function key assigned. You can configure a separate function
key for each number ("MSN-1"..."MSN-9"), or a function key for all numbers. The period
after which calls are automatically accepted is configured once for all numbers of the
telephone.
•
$:E 4$ :. 33--
: Several external ISDN or IP connections to bundles can be
grouped in the system. With a bundle key, you can save these connections on a function
key. If this key is pressed, automatic hands-free is enabled and a free B channel of the
corresponding bundle is assigned. You then hear the external dialling tone.
•
3 L<
(not with the S5x0): In addition to the softkeys "Connection 1..", func-
tion keys can be configured on the system telephone or the extension for operation while
brokering. At least two connection keys must be configured.
•
(
: You can assign a key in such a way that when pressed, the guest is
checked in or out (first level), or the selected hotel room phone is called (second level).
You must configure this key on the first level, then the connected key on the second level
is automatically assigned and, as the case applies, its content overwritten.
•
<- 5$E
: The called party is put on hold for enquiry and dials a code. The tele-
phone is now freed for other operations, e. g. announcements. Another party can accept
the call, if he lifts the receiver and dials the relevant code of the held call. The codes as-
signed by the PABX can also be entered in the function keys of one or more system tele-
phones. If a call is set to open hold for enquiry by pressing the function key, this is indic-
ated by flashing LEDs on the function keys for the system telephones set up for this. The
call is transferred by pressing the corresponding function key. This performance feature
is only possible if only one call is on hold.
29 User Access
bintec elmeg GmbH
670
elmeg hybird 120 / hybird 130
