Field
Description
Access Filter
Select an IP filter.
If the rule chain is new, select the filter to be set at the first point
of the rule chain.
If the rule chain already exists, select the filter to be attached to
the rule chain.
Action
Define the action to be taken for a filtered data packet.
Possible values:
•
>
(default value): Allow packet if it matches the filter.
•
> = =$ - 37
: Allow packet if it
does not match the filter.
•
!< = =$ 37-
: Deny packet if it matches the
filter.
•
!< = =$ - 37
: Deny packet if it does
not match the filter.
•
$
: Use next rule.
To set the rules of a rule chain in a different order select the
button in the list menu for
the entry to be shifted. A dialog box opens, in which you can decide under Move whether
the entry
; >
(default value) or
; 6
another rule of this rule chain is to be shifted.
20.4.3 Interface Assignment
In this menu, the configured rule chains are assigned to the individual interfaces and the
gateway’s behavior is defined for denying IP packets.
A list of all configured interface assignments is displayed in the Networking->Access
Rules->Interface Assignment menu.
bintec elmeg GmbH
20 Networking
elmeg hybird 120 / hybird 130
407
