Field
Description
Select the Ethernet interface for which the virtual interface is to
be configured.
Address Mode
Select how an IP address is assigned to the interface.
Possible values:
•
3
(default value): The interface is assigned a static IP
address in IP Address / Netmask.
•
!(5
: An IP address is assigned to the interface dynamically
via DHCP.
IP Address / Netmask
Only for Address Mode =
3
With Add, add a new address entry, enter the IP Address and
the corresponding Netmask of the virtual interface.
Interface Mode
Only for physical interfaces in routing mode and for virtual inter-
faces.
Select the configuration mode of the interface.
Possible values:
•
(default value): The interface is not assigned for a
specific purpose.
•
@8"
: This option only applies for routing inter-
faces.
You use this option to assign the interface to a VLAN. This is
done using the VLAN ID, which is displayed in this mode and
can be configured. The definition of a MAC address in MAC
Address is optional in this mode.
MAC Address
Enter the MAC address associated with the interface. For virtual
interfaces, you can use the MAC address of the physical inter-
face under which the virtual interface was created by activating
Use built-in, but VLAN IDs must be different. You can also al-
locate a virtual MAC address. The first 6 characters of the MAC
are preset (but can be changed).
VLAN ID
Only for Interface Mode =
@8"
This option only applies for routing interfaces. Assign the inter-
18 LAN
bintec elmeg GmbH
328
elmeg hybird 120 / hybird 130
