7.2.4 ISDN point-to-multipoint connection
In its ex works state, the hybird 120 / hybird 130 is ready to operate on a point-
to-multipoint ISDN connection. When the hybird 120 / hybird 130 has been connected to
the ISDN point-to-multipoint connection, the status display must change to a green arrow.
(1)
Go to the Physical Interfaces->ISDN Ports->ISDN External menu.
Go to the following menu to configure the individual number (MSN):
(1)
Go to Numbering->Trunk Settings ->Trunk Numbers ->New.
(2)
For Trunk, select the connection for which you want to configure the numbers, here
!" #$
.
(3)
The
":;$ "
option has been pre-configured for Type of Number.
(4)
In the Single Number (MSN) field, one of the numbers issued by the provider is
entered, e.g.
)+
.
(5)
Confirm with OK.
You enter point-to-point access numbers in a later step, in the User Settings. If necessary,
use the values preset for the users.
Your device is now set up for making calls via your point-to-multipoint ISDN connection.
7.2.5 Point-to-point ISDN access
If you have ordered a point-to-point ISDN access, you need to make a few more entries.
Go to the following menu to configure the external ISDN port:
(1)
Go to Physical Interfaces->ISDN Ports->ISDN External->
.
(2)
Enter a user-defined Description for the ISDN interface, e. g.
!" #$
.
(3)
For Access Configuration, select the setting
!" 55
.
(4)
Confirm the inputs with OK.
Go to the following menu to configure the external ISDN connection:
(1)
Go to Numbering->Trunk Settings ->Trunks.
(2)
Delete the predefined entry
!" #$
by clicking the
icon.
Use New to add a new entry to the configuration of your ISDN access.
(1)
Go to Numbering->Trunk Settings ->Trunks->New at the entry with Description
!" #$
.
(1)
For Access Type, select
!" 55
.
bintec elmeg GmbH
7 Basic configuration
elmeg hybird 120 / hybird 130
53
