Field
Description
•
'
: The operation is initiated if a single event occurs.
•
"
: The operation is triggered if no event occurs.
•
'
: The operation is triggered if one of the events does
not occur.
Reboot device after
Only if Command Type =
;
Enter the timespan in seconds that must elapse after occur-
rence of the event until the device is restarted.
The default value is
+
seconds.
MIB/SNMP Variable to
add/edit
Only if Command Type =
9/ "5
Select the MIB table in which the MIB variable whose value
shall be changed is saved. First, select the System, then the
MIB Table. Only the MIB tables present in the respective area
are displayed.
Command Mode
Only if Command Type =
9/ "5
Select how the MIB entry is to be manipulated.
Possible settings:
•
7 #- $<
(default value): An existing entry
shall be modified.
•
$ > 9 $<
: A new entry shall be created.
Index Variables
Only if Command Type =
9/ "5
Where required, select MIB variables to uniquely identify a spe-
cific data set in MIB Table, e.g.
=#
. The unique
identification of a particular table entry is derived from the com-
bination of Index Variable (usually an index variable which is
flagged with *) and Index Value.
Use Index Variables to create more entries with Add.
Trigger Status
Only if Command Type =
9/ "5
Select what status the event must have in order to modify the
MIB variable as defined.
25 Local Services
bintec elmeg GmbH
572
elmeg hybird 120 / hybird 130
