Fields in the IP Mode and Routes menu.
Field
Description
IP Address Mode
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
•
3
(default value): You enter a static IP address.
•
5$ 6 5 $--
: Only for PPTP Mode =
5"
: Your
device dynamically assigns an IP address to the remote ter-
minal.
•
4 5 $--
: Only for PPTP Mode =
A >-
: Your device is dynamically assigned an IP ad-
dress.
Default Route
Only if IP Address Mode =
3
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
;
.
The function is disabled by default.
Create NAT Policy
Only if IP Address Mode =
3
When you configure an PPTP connection, specify whether Net-
work Address Translation (NAT) is to be enabled.
The function is enabled with
;
.
The function is disabled by default.
Local IP Address
Only for IP Address Mode =
3
Assign the IP address from your LAN to the PPTP interface
which is to be used as your device's internal source address.
Route Entries
Only if IP Address Mode =
3
Define routing entries for this connection partner.
•
5 $--
: IP address of the destination host or
LAN.
•
"-E
: Netmask for Remote IP Address
23 VPN
bintec elmeg GmbH
514
elmeg hybird 120 / hybird 130
