Beam MG200, User Manual

Page: 98 / 291

MG200 USER MANUAL
98 of 269
©
2019 BEAM
is based on IEEE 802.11 standard.
⚫
2.4G Wi-Fi can select b, g and n only or mixed with each other.
Wi-Fi
Operation
Mode
Mandatory field.
Enter the Wi-Fi Operation Mode according to your application.
Navigate to the following table for AP Router Mode , WDS Only
Mode , and WDS Hybrid Mode settings.
Green AP
Disabled by
default. Check the Enable box to activate Green AP function.
VAP Isolation Enabled by default.
Check the Enable box to activate this function.
It means that stations which associates to different VAPs cannot
communicate with each other.
Time
Schedule
Mandatory field.
Apply a specific Time Schedule to this rule; otherwise leave it as (0)
Always .
If the dropdown list is empty, ensure Time Schedule is pre-
configured. Refer to User Rule > Scheduling > Configuration tab.
By default, VAP 1 is enabled and security key is required to connect to the MG200 wirelessly to enhance the
security level and prevent unexpected access of un-authorized MG200s.
The default Wi-Fi key is printed on the MG200 label. It is created randomly and differs from MG200s. However, it
is strongly recommended that you change the Wi-Fi key upon the 1
st login to the MG200.
Click
Add / Edit button in the VAP List window to create or edit the settings for a VAP. A VAP Configuration
window will appear.
For VAP 1: