Beam MG200 User Manual Download Page 172

Page: 172 / 291

MG200 USER MANUAL

172 of 269

2019 BEAM

OpenVPN Advanced Client Configuration
Item

Value setting

Description

TLS Cipher

Mandatory field.

TLS-RSA-WITH-
AES128-SHA

selected by default.

Enter the

TLS Cipher

from the dropdown list.

It can be

None / TLS-RSA-WITH-RC4-MD5 / TLS-RSA-WITH-

AES128-SHA / TLS-RSA-WITH-AES256-SHA / TLS-DHE-DSS-
AES128-SHA / TLS-DHE-DSS-AES256-SHA.

Note: TLS Cipher will be available only when TLS is chosen in
Authorization Mode.

TLS Auth. Key

Optional field.
String format: any
text.

Enter the

TLS Auth. Key

for connecting to an OpenVPN server, if

the server required it.

Note: TLS Auth. Key will be available only when TLS is chosen in
Authorization Mode.

User Name

Optional field.

Enter the

user account

for connecting to an OpenVPN server, if

the server required it.
Note: Username will be available only when TLS is chosen in

Summary of Contents for MG200




































































































































































































































































































Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands

Beam MG200, User Manual

Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands