Beam MG200, User Manual

Page: 134 / 291

MG200 USER MANUAL
134 of 269
©
2019 BEAM
DNS Redirect Configuration
Item
Value setting Description
DNS
Redirect
Disabled by default. Check the Enable box to activate this function.
If you enable the DNS Redirect function, you need to enter the redirect rules. According to the rules, the MG200
can redirect the traffic that matched the DNS to corresponding pre-defined IP address.
When
Add button is applied, Redirect Rule window will appear.
Redirect Rule Configuration
Item
Value setting Description
Domain
Name Enter text string.
Mandatory field.
Enter a domain name to be redirect. The traffic to specified
domain name will be redirect to the following IP address.
Value Range: at least 1 character is required; ‘*’ for any.
IP
IPv4 format.
Mandatory field.
Enter an IP Address as the target for the DNS redirect.
Condition
Mandatory field.
Default setting:
Enter when will the DNS redirect action can be applied.
It can be
Always , or WAN Block .