Beam MG200, User Manual

Page: 234 / 291

MG200 USER MANUAL
234 of 269
©
2019 BEAM
Remote Host Configuration
Item
Value setting Description
Host Name String format: any
text Enter the host name for the designated remote host.
Value Range: -1 - 64 characters.
Host IP Mandatory field. Enter the IP Address of remote host. It will be use as destination
IP for sending NMEA packets.
Protocol Type Default setting:
TCP .
Enter the Protocol ( TCP or UDP ) to use for sending NMEA
packets.
Port Number Mandatory field. Enter a Port Number as destination port for sending NMEA
packets.
Value Range: 1 - 65535.
Interval(s) Mandatory field. Enter the time interval (seconds) between two NMEA packets.
Value Range: 1 -255 seconds.
Prefix Message String format: any
text. Enter optional prefix string with specific information if your
backend server can recognize.
For example, you can input the IMEI code of the MG200 here, and
then your backend server can recognize this GPS data is sent
from the MG200. You can also leave this field blank.