Beam MG200, User Manual

Page: 88 / 291

MG200 USER MANUAL
88 of 269
©
2019 BEAM
Interface 1 . server for these members of this VLAN group.
Save Button.
Click Save button to save the configuration.
Note: After clicking Save button, always click Apply button to
apply the settings.
If you select New to create a new DHCP server setting for the VLAN group, you need to set up the following
configuration.
Tag-based VLAN Configuration (part-II)
Item
Value setting Description
IP Address Mandatory field.
Assign an IP Address for the DHCP Server that the rule used, this
IP address is a MG200 IP.
Subnet
Mask Default setting:
255.255.255.0(/24) .
Select a Subnet Mask for the DHCP Server.
DHCP
Relay
Disabled by default.
Check the box to enable the DHCP Relay function for the VLAN
group, and you only need to fill the
DHCP Server IP Address
field.
WAN
Interface Default setting: WAN-
1 .
Select which WAN interface that allow accessing Internet.
DHCP
Option 82
Optional Setting.
If you select Relay type of DHCP Server, you can further enable
the DHCP Option 82 setting if the DHCP server support it.
Save Button Click the Save button to save the configuration
After the configuration is applied, the configured tag-based VLAN group information will be displayed in the
following window.