Beam MG200, User Manual

Page: 230 / 291

MG200 USER MANUAL
230 of 269
©
2019 BEAM
Notifying Event Configuration
Item
Value setting Description
Event Default setting: None . Enter the Event type and corresponding event configuration. Up
to 3 event conditions can be specified for defining an event, and
the event will be triggered when all the conditions hold
simutaneously (AND relation).
The supported Event Type could be:
WAN : Select WAN and a trigger condition to enter a certain
WAN Event;
LAN&VLAN : Select LAN&VLAN and a trigger condition to
enter a certain LAN&VLAN Event;
Wi-Fi : Select Wi-Fi and a trigger condition to enter a certain Wi-
Fi Event;