Beam MG200, User Manual

Page: 159 / 291

MG200 USER MANUAL
159 of 269
©
2019 BEAM
Note_1: When Dynamic VPN option in Tunnel Scenario is
selected, there will be only one subnet available.
Note_2: When Host-to-Site or Host-to-Host option in Tunnel
Scenario is selected, Local Subnet will not be available.
Note_3: When Hub and Spoke option in Hub and Spoke is
selected, there will be only one subnet available.
Remote Subnet
List
Mandatory field.
Enter the Remote Subnet IP address and Subnet Mask.
Click the Add or Delete button to add or delete Remote Subnet
setting.
Remote MG200
Mandatory field.
Format can be a
ipv4 address or
FQDN.
Enter the Remote MG200.
Back
Button.
When the X button is clicked, the window will return to the
Application Filter Configuration page.
Authentication Configuration Window
Item
Value setting Description
Key
Management
Mandatory field.
Pre-shared Key, 8
to 32 characters.
Select Key Management from the dropdown box for this IPSec
tunnel.
IKE+Pre-shared Key: User needs to set a key (8 - 32 characters).
IKE+X.509: User needs Certificate to authenticate. IKE+X.509 will
be available only when Certificate has been configured properly.
Refer to Certificate section of this manual and
User Rule >
Certificate in web-based utility.