Beam MG200, User Manual

Page: 273 / 291

MG200 USER MANUAL
273 of 269
©
2019 BEAM
Timeout Default setting: 300 .
Enter the maximum timeout interval for the FTP connection.
Supported range is 60 to 7200 seconds.
Max.
Connections
per IP
Default setting: 2.
Enter the maximum number of clients from the same IP address
for the FTP connection. Up to 5 clients from the same IP address
is supported.
Max. FTP
Clients
Default setting: 5
Enter the maximum number of clients for the FTP connection. Up
to 32 clients is supported.
PASV Mode Optional setting.
Check the Enable box to activate the support of PASV mode for
an FTP connection from FTP clients.
Port Range of
PASV Mode Default Setting:
50000 - 50031 .
Enter the port range to allocate for PASV style data connection.
Value Range: 1024 - 65535.
Auto Report
External IP in
PASV Mode
Optional setting.
Check the Enable box to activate the support of overriding the IP
address advertising in response to the PASV command.
ASCII
Transfer
Mode
Optional setting.
Check the Enable box to activate the support of ASCII mode data
transfers.
Binary mode is supported by default.
FTPS (FTP
over SSL/TLS)
Optional setting.
Check the Enable box to activate the support of secure
connections via SSL/TLS.
The
SFTP Server can be enable and configured in the following window.
Configuration
Item
Value setting Description
SFTP
Disabled by default.
Check Enable box to activate the embedded SFTP Server
function.
Furthermore, you can check the granted interface(s) for the SFTP
connection, via
LAN , WAN , or both.
⚫
With the SFTP Server enabled, you can retrieve or delete the
stored log files via secure SFTP connection.
SFTP Port Default setting: 22 Enter a port number for SFTP connection. The MG200 will listen
for incoming SFTP connections on the specified port.