Beam MG200, User Manual

Page: 165 / 291

MG200 USER MANUAL
165 of 269
©
2019 BEAM
Protocol Mandatory field.
Default setting:
TCP .
Define the selected Protocol for connecting to the OpenVPN
Server.
•
Select TCP, or UDP
-> The TCP protocol will be used to access the OpenVPN Server,
and
Port will be set as 4430 automatically.
•
Select UDP
-> The UDP protocol will be used to access the OpenVPN Server,
and
Port will be set as 1194 automatically.
Port Mandatory field.
Default setting:
4430 .
Enter the Port for connecting to the OpenVPN Server.
Value Range: 1 - 65535.
Tunnel
Scenario Mandatory field.
Default setting:
TUN .
Enter the type of Tunnel Scenario for connecting to the OpenVPN
Server. It can be TUN for TUN tunnel scenario or TAP for TAP
tunnel scenario.
Authorization
Mode Mandatory field.
Default setting:
TLS .
Enter the authorization mode for the OpenVPN Server.
• TLS
->The OpenVPN will use TLS authorization mode, and the
following items
CA Cert. , Server Cert. and DH PEM will be
displayed.
CA Cert. could be generated in Certificate. Refer to User Rule >
Certificate > Trusted Certificate .
Server Cert. could be generated in Certificate. Refer to User
Rule > Certificate > My Certificate .
•
Static Key
->The OpenVPN will use static key (pre-shared) authorization
mode, and the following items
Local Endpoint IP Address ,
Remote Endpoint IP Address and Static Key will be displayed.
Note: Static Key will be available only when TUN is chosen in
Tunnel Scenario.
Local
Endpoint IP
Address Mandatory field. Enter the virtual Local Endpoint IP Address of this OpenVPN
MG200.
Value Range: The IP format is 10.8.0.x, the range of x is 1-254.
Note: Local Endpoint IP Address will be available only when
Static Key is chosen in Authorization Mode.
Remote
Endpoint IP
Address Mandatory field. Enter the virtual Remote Endpoint IP Address of the peer
OpenVPN MG200.
Value Range: The IP format is 10.8.0.x, the range of x is 1-254.
Note: Remote Endpoint IP Address will be available only when
Static Key is chosen in Authorization Mode.
Static Key Mandatory field. Enter the Static Key .
Note: Static Key will be available only when Static Key is chosen in
Authorization Mode.
Server Virtual
IP Mandatory field. Enter the Server Virtual IP .
Value Range: The IP format is 10.y.0.0, the range of y is 1-254.